HyperX HX432C16PB3A/8 is a 1G x 64-bit (8GB) DDR4-3200 CL16 SDRAM (Synchronous DRAM) 1Rx8, memory module,based on eight 1G x 8-bit FBGA components per module. Each module kit supports Intel Extreme Memory Profiles(Intel XMP) 2.0. Each module has been tested to run at DDR4-3200 at a low latency timing of 16-18-18 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:
XMP TIMING PARAMETERS
JEDEC: DDR4-2400 CL17-17-17 at 1.2V
XMP Profile 1: DDR4-3200 CL16-18-18 at 1.35V
XMP Profile 2: DDR4-3000 CL15-17-17 at 1.35V
FEATURES
Power Supply: VDD = 1.2V Typical
VDDQ = 1.2V Typical
VPP = 2.5V Typical
VDDSPD = 2.4V to 3.3V
On-Die termination (ODT)
16 internal banks 4 groups of 4 banks each
Bi-Directional Differential Data Strobe
8 bit pre-fetch
Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
HyperX Infrared Sync working distance 18mm
Factory preset RGB wave lighting effect
CL(IDD):
17 cycles
Row Cycle Time (tRCmin):
45.75ns(min.)
Refresh to Active/Refresh Command Time (tRFCmin):
350ns(min.)
Row Active Time (tRASmin):
32ns(min.)
Maximum Operating Power:
TBD WNOTE
UL Rating:
94V – 0
Operating Temperature:
0oC to +70oC
Storage Temperature:
-40oC to +85oC
NOTE:
Power will vary depending on the SDRAM used.
Item Dimension (L inchxW inchxH inch)
3 x 7 x 1
Weight
1.00lb
Warranty Information
Lifetime Warranty
There are no reviews yet.