Supermicro System SYS-5039A-I Socket R4 LGA 2066 Max.512GB DDR4 PCI Express SATA Mid Tower Brown Box

Key Features
• High Performance Workstation

• Designed for 2D/3D Content Creation

1. Single socket R4 (LGA 2066) supports Intel® Xeon® processor W Family

2. Intel® C422 chipset

3. Up to 512GB reg. ECC LRDIMM, up to DDR4-2666MHz; 8 DIMM slots

4. 3 PCI-E 3.0 x16 (8/16/16, 48 lanes),

1 PCI-E 3.0 x4,

M.2 Interface: 2 PCI-E 3.0 x4

M.2 Form Factor: 22110/2280

M.2 Key: M-Key (RAID 0,1 support)

U.2 Interface: 2 PCI-E 3.0 x4

5. ALC 1220 7.1 HD Audio, 1 COM, 2 GbE LAN, 2 USB 3.0 (front)

6. 4 internal 3.5″ drive bays

7. 900W High Efficiency Power Supply
Processor
CPU:
– Intel Xeon Processor W Family
– Single Socket R4 (LGA 2066), CPU TDP support up to 140W
System Memory
Memory Capacity:
– 8 DIMM slots
– Up to 512GB Registered ECC LRDIMM
– Up to 256GB Registered ECC RDIMM
– Up to DDR4-2666MHz
Memory Type: 2666/2400/2133MHz ECC DDR4 SDRAM
DIMM Sizes: 64GB, 32GB, 16GB, 8GB, 4GB
On-Board Devices
Chipset: Intel C422 chipset
SATA:
– SATA3 (6Gbps) via Intel C422 controller
– RAID 0, 1, 5, 10 support
Network Controllers:
– Single LAN with Intel PHY I219LM LAN controller
– Single LAN with Aquantia 5G LAN chip AQC108
Audio: ALC 1220 7.1 HD Audio
Input / Output
SATA: 6 SATA3 (6Gbps) ports from Intel C422
LAN: 2 RJ45 Ethernet LAN ports
USB:
– 6 USB 3.0 ports (4 rear + 2 headers)
– 6 USB 2.0 ports (2 rear + 4 headers)
– 2 USB 3.1 (2 Type A)
Audio: 7.1 HD Jacks
Serial Port / Header: 1 COM port (header)
TPM: 1 TPM 1.2 20-pin Header
Expansion Slots
PCI-Express:
– 3 PCI-E 3.0 x16 slots (8/16/16, 48 lanes)
– 1 PCI-E 3.0 x4 slot
M.2:
– M.2 Interface: 2 PCI-E 3.0 x4
– M.2 Form Factor: 22110/2280
– M.2 Key: M-Key (RAID 0,1 support)
– U.2 Interface: 2 PCI-E 3.0 x4
System BIOS
BIOS Type: UEFI 256Mb
BIOS Features:
– ACPI 3.0 or later
– SMBIOS 2.7 or later
– BIOS rescue hot-key
– SPI dual/quad speed support
– RTC wakeup
Chassis
Form Factor: Mid-Tower
Model: CSE-732D3-903B
Available Colors: Black
Front Panel
Buttons: Power On/Off button
LEDs:
– Power LED
– Hard drive activity LED
– Network activity LED
– System Information LED
Ports:
– 2 front USB 3.0 Ports
– 1 Line-out, 1 Mic-in
Drive Bays
Internal:
– 4 fixed 3.5″ drive bays
– Enterprise SATA HDD only recommended
Peripheral:
– 2 optional 5.25″ Peripheral drive bays
– 1 optional card reader module
System Cooling
Fans:
– 1x 12cm rear exhaust fan
– Optional 1x 12cm front cooling fan
Power Supply
900W AC multi output power supply
AC Voltage: 100-240 V, 50-60 Hz, 10-6 Amp
+5V Standby: 3 Amp
+12V1: 25 Amp
+12V2: 25 Amp
+12V3: 25 Amp
+12V4: 25 Amp
+5V: 25 Amp
+3.3V: 25 Amp
-12V: 0.5 Amp
Certification: Gold Level
Note:
– Max. continuous combined load on +3.3V and +5V output shall not exceed 155W.
– Max. continuous combined load on +12V1, +12V2, +12V3 and +12V4 output shall not exceed 860W.
PC Health Monitoring
CPU:
– Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
– 6-Phase-switching voltage regulator
FAN: Low noise fan speed control
Temperature:
Monitoring for CPU and chassis environment
– Thermal Control for 8x fan connectors
– PECI
Operating Environment / Compliance
RoHS: RoHS Compliant
Environmental Spec. :
– Operating Temperature: 10^oC to 35^oC (50^oF to 95^oF)
– Non-operating Temperature: -40^oC to 70^oC (-40^oF to 158^oF)
– Operating Relative Humidity: 8% to 90% (non-condensing)
– Non-operating Relative Humidity: 5% to 95% (non-condensing)
Item Dimension ( L inch x W inch x H inch)
NA
Weight
36.00 lb
Warranty Information
30 days cross ship, 1 year parts, 3 years labor