Key Features
• Mainstream, Entry Appliance
• Low Power, Cost effective
1. Single socket H4 (LGA 1151) supports
Intel® Xeon® processor E3-1200 v5,
Intel® 6th Gen. Core™ i3 series
2. Intel® C232 chipset
3. 1x 3.5″ Fixed drive bay or
2x 2.5″ drive option
4. Up to 64GB Unbuffered ECC UDIMM
DDR4 2133MHz; 4x DIMM slots
5. 1x PCI-E 3.0 x8 AOC slot
6. 2x GbE ports with Intel® i210-AT
1x shared IPMI port
7. I/O ports: 1x VGA, 1x COM,
2x USB 2.0, USB 3.0
9. 200W Multi-output power supply
Processor/Cache
CPU : Single Socket H4 (LGA 1151) supports:
Intel Xeon processor E3-1200 v5,
Intel 6th Gen Core i3
CPU TDP up to 45W, 80W option fan
System Memory
Memory Capacity : 4x 288-pin DDR4 DIMM slots
Up to 64GB DDR4 ECC UDIMM
Memory Type : 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs
DIMM Sizes : 16GB, 8GB, 4GB
Memory Voltage : 1.2 V
Error Detection : Corrects single-bit errors
Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset : Intel C232 chipset
SATA : SATA3 (6Gbps) via C232 controller
RAID 0, 1, 5, 10 support
IPMI : Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2400 BMC
Network Controllers : Dual Intel I210-AT Gigabit Ethernet LAN ports
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Video : ASPEED AST2400 BMC
Input / Output
SATA : 2x SATA3 (6Gbps) ports
LAN : 2x RJ45 Gigabit Ethernet LAN ports
1x RJ45 Shared IPMI LAN port
USB : USB 3.0
2x USB 2.0 ports
Video : 1x VGA port
Serial Port / Header : 1x COM ports (1 rear)
SuperDOM : 2x SuperDOM (Disk on Module) ports with built-in power
PC Health Monitoring
Voltage : Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
FAN : Total of 4 fan headers supporting up to 4 fans
4 fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature : Monitoring for CPU and chassis environment
CPU thermal trip support
I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
LED : CPU / System Overheat LED
Suspend static indicator LED
UID/Remote UID
Other Features : Chassis intrusion detection
Chassis intrusion header
Chipkill support
RoHS, Halogen Free
Chassis
Form Factor : 1U Rackmount
Model : CSE-510-203B
Front Panel
Buttons : Power On/Off button
System Reset button
LEDs : Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED
Information LED (temp., status)
Expansion Slots
PCI-Express : 1x PCI-E 3.0 x8 AOC slot
Drive Bays
Optional : 1x 3.5″ or 2x 2.5″ internal drive bays (fixed)
System Cooling
Fans : 2x 40x28mm 4-pin PWM Cooling Fans
1x FAN-0147L4 option for 80W CPU
Power Supply
200W Low Noise AC-DC power supply with PFC
AC Voltage : 100 – 240V, 50-60Hz, 2.6 Amp Max
+5V : 8.0 Amp (max.)
+5V standby : 2.0 Amp (max.)
+12V : 16 Amp (max.)
-12V : 0.5 Amp (max.)
+3.3V : 8.0 Amp (max.)
System BIOS
BIOS Type : 8MB SPI Flash EEPROM with AMI BIOS
BIOS Features : DMI 2.3
PCI 2.3
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
Operating Environment / Compliance
RoHS : RoHS Compliant
Environmental Spec. :
Operating Temperature : 10oC to 35oC (50oF to 95oF)
Non-operating Temperature : -40oC to 70oC (-40oF to 158oF)
Operating Relative Humidity : 8% to 90% (non-condensing)
Non-operating Relative Humidity : 5% to 95% (non-condensing)
Item Dimension (L inchxW inchxH inch)
NA
Weight
13.00 lb
Warranty Information
3 YRS LABOR, 1 YRS PARTS, 1 YR CRS UNDER LIMITED WARRANTY
There are no reviews yet.