Supermicro System SYS-4028GR-TRT2 4U Rackmountable E5-2600v4-v3 LGA2011 2xR3 24×2.5 inch Hot-swap 2000W Redundant Power Supplies Brown Box

Key Features
– Up to 10 Double-Width GPUs
– GPUs under Single-Root complex
– Supports RDMA
1. Dual socket R3 (LGA 2011) supports Intel Xeon processor E5-2600v4/ v3 family QPI up to 9.6GT/s
2. Up to 3TB ECC 3DS LRDIMM , up to DDR4- 2400MHz 24x DIMM slots
3. Expansion slots, Single Root Complex, 11 PCI-E 3.0 x16 (FH, FL) slots 1 PCI-E 3.0 x8 (in x16) slots
4. 2 10GBase-T LAN with Intel X540
5. 24x 2.5″ Hot-swap drive bays
6. 8x 92mm RPM Hot-Swap cooling fans
7. 2000W Redundant (2+2) Power Supplies Titanium Level (96%+)
Processor/Cache
CPU:
– Intel Xeon processor E5-2600 v4/ v3 family (up to 160W TDP)
– Dual Socket R3 (LGA 2011)
Cores / Cache: Up to 22 Cores / Up to 55MB Cache
System Bus: QPI up to 9.6 GT/s
System Memory
Memory Capacity:
– 24x 288-pin DDR4 DIMM slots
– Up to 3TB ECC 3DS LRDIMM, 1.5TB ECC RDIMM
Memory Type: 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes:
– RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
– LRDIMM: 64GB, 32GB
– 3DS LRDIMM: 128GB
Memory Voltage: 1.2 V
Error Detection: Corrects single-bit errors
On-Board Devices
Chipset: Intel C612 chipset
SATA: SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI:
– Support for Intelligent Platform Management Interface v.2.0
– IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
– ASPEED AST2400 BMC
Network Controllers:
– Dual 10GBase-T Ports with Intel X540
– Virtual Machine Device Queues reduce I/O overhead
– Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics: ASPEED AST2400 BMC
Input / Output
SATA: 4 SATA3 (6Gbps) ports
LAN:
– 2 RJ45 10GBase-T LAN ports
– 1 RJ45 Dedicated IPMI LAN port
USB: 4 USB 3.0 ports
Video: 1 VGA Connector
Serial Port: 1 Serial header
System BIOS
BIOS Type: 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features :
– Plug and Play (PnP)
– APM 1.2
– DMI 2.3
– PCI 2.3
– ACPI 1.0 / 2.0 / 3.0
– USB Keyboard support
– SMBIOS 2.7.1
– UEFI
Chassis
Form Factor:
– 4U Rackmountable
– Rackmount Kit (MCP-290-00057-0N)
Model: CSE-418GTS-R4000B
Available Colors
Black
Drive Bays
Hot-swap: 24x 2.5 inch Hard drive bays
PCI-Express
– 11 PCI-E 3.0 x16 (FH, FL) slots
– 1 PCI-E 3.0 x8 (in x16) slots
– Single Root Complex
Backplane
SAS/SATA HDD Backplane
System Cooling
Fans: 8x 92mm RPM Hot-Swappable Cooling Fans
Shrouds: 1 Air Shroud (MCP-310-84808-0B)
Power Supply
2000W Redundant Power Supplies with PMBus
Total Output Power: 1000W/1800W/1980W/2000W
Input:
– 100-120Vac / 12-9.5A / 50-60Hz
– 200-220Vac / 10-9.5A / 50-60Hz
– 220-230Vac / 10-9.8A / 50-60Hz
– 230-240Vac / 10-9.8A / 50-60Hz
– 200-240Vac / 11.8-9.8A / 50-60Hz (UL/cUL only)
+12V:
– Max: 83.3A / Min: 0A (100-120Vac)
– Max: 150A / Min: 0A (200-220Vac)
– Max: 165A / Min: 0A (220-230Vac)
– Max: 166.7A / Min: 0A (230-240Vac)
– Max: 166.7A / Min: 0A (200-240Vac) (UL/cUL only)
12Vsb: Max: 2.1A / Min: 0A
Output Type: 25 Pairs Gold Finger Connector
Certification
UL/cUL/CB/BSMI/CE/CCC
PC Health Monitoring
CPU:
– Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V) Standby, VBAT, Memory, Chipset Voltages.
– 4-Phase-switching voltage regulator with auto-sense from 0.6V-1.35V
FAN:
– 4-pin fan headers with tachometer status monitoring
– Low noise fan speed control mode
Temperature:
– Monitoring for CPU and system environment
– Thermal Control for 8x fan connectors
Other Features: Chassis intrusion detection
Operating Environment / Compliance
RoHS: RoHS Compliant
Environmental Spec.:
– Operating Temperature: 10^oC to 35^oC (50^oF to 95^oF)
– Non-operating Temperature: -40^oC to 70^oC (-40^oF to 158^oF)
– Operating Relative Humidity: 8% to 90% (non-condensing)
– Non-operating Relative Humidity: 5% to 95% (non-condensing)
Item Dimension (L inchxW inchxH inch)
42 x 28 x 18

Weight
153.00 lb

Warranty Information
1 Year