, ,

Supermicro System SYS-1029TP-DTR 1U Xeon LGA 3647 up to 2TB DDR4 4×3.5 inch Hot Swap SATA3 Brown Box

Supermicro
Availability:

Out of stock


$3,127.95

Out of stock

Key Features

– Mission-critical applications

– High Availability Storage

Appliance Platform

Two hot-pluggable systems (nodes) in a 1U form factor. Each node supports the following:

1. Dual socket P (LGA 3647) supports Intel® Xeon® Scalable Processors, Dual UPI up to 10.4GT/s

2. Up to 2TB ECC 3DS LRDIMM, up to DDR4-2666MHz; 16 DIMM slots

3. 2 PCI-E 3.0 x16 slots

4. Flexible Networking support via SIOM; Dedicated IPMI 2.0 LAN

5. 4 Hot-swap 2.5″ SATA3 drive bays

6. 2 SuperDOM onboard or optional 2 M.2 carrier

7. Up to 1000W Redundant Power Supplies Titanium Level (96%)
Motherboard
Super X11DPT-PS
Processor/Cache
CPU:
Dual Socket P (LGA 3647)
Intel Xeon Scalable Processors, Dual UPI up to 10.4GT/s
Support CPU TDP 70-145W
Cores: Up to 28 Cores with Intel HT Technology
System Memory
Memory Capacity:
16 DIMM slots
Up to 2TB ECC 3DS LRDIMM, 2TB ECC RDIMM, DDR4 up to 2666MHz
Memory Type: 2666/2400/2133MHz ECC DDR4 SDRAM
On-Board Devices
Chipset: Intel C621 chipset
SATA: SATA3 (6Gbps) RAID 0, 1, 5, 10
Network Controllers: Barebones and Complete System must have at least one SIOM or network card installed per node
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics: ASPEED AST2500 BMC
Input / Output (per Node)
SATA: 4 SATA3 (6Gbps) ports
LAN: 1 RJ45 Dedicated IPMI LAN port
USB: 2 USB 3.0 ports (rear)
VGA: 1 VGA port
Serial Port / Header: 1 Fast UART 16550 port / 1 Header (internal)
Others: 2 SuperDOM support on the motherboard
System BIOS
BIOS Type: AMI 32MB SPI Flash ROM
Management
Software:
Intel Node Manager
IPMI 2.0
KVM with dedicated LAN
NMI
SSM, SPM, SUM
SuperDoctor 5
Watchdog
Power Configurations: ACPI Power Management
PC Health Monitoring
CPU:
Monitors for CPU Cores, Chipset Voltages, Memory.
4+1 Phase-switching voltage regulator
FAN:
Fans with tachometer monitoring
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors
Temperature:
Monitoring for CPU and chassis environment
Thermal Control for fan connectors
Chassis
Form Factor: 1U Rackmount
Model: CSE-809H-R1K05P3
Front Panel
Buttons:
Power On/Off button
UID button
LEDs:
Power status LED
HDD activity LED
Network activity LEDs
Universal Information (UID) LED
Expansion Slots (per Node)
PCI-Express:
2 PCI-E 3.0 x16 Low-profile slots
1 SIOM card support
Note: Barebones and Complete System must bundle with SIOM
(With only one CPU installed, SXB2 M.2
Drive Bays (per Node)
Hot-swap: 4 Hot-swap 2.5″ SAS3/SATA3 drive bays
Backplane
SAS3 backplane
System Cooling
Fans: 3 Heavy duty counter rotating fans with air shroud and optimal fan speed control
PowerStick Power Supply
1000W 1U Redundant Power Supplies with PMBus
Total Output Power: 800W/1000W
Dimension (W x H x L): 38 x 40 x 360 mm
Input:
100-127Vac / 9-7.5A / 50-60Hz
200-240Vac / 6-5A / 50-60Hz
+12V:
Max: 66.7A / Min: 0A (100-127Vac)
Max: 83A / Min: 0A (200-240Vac)
+5Vsb: Max: 4A / Min: 0A
Output Type: Gold Finger Connector (16 Power Pin, 14 Signal Pin)
Certification:
UL/cUL/CB/BSMI/CE/CCC
Titanium Level
(Cert. in progress)
Operating Environment
RoHS: RoHS Compliant
Environmental Spec.:
Operating Temperature: 10oC – 35oC (50oF – 95oF)
Non-operating Temperature: -40oC to 60oC (-40oF to 140oF)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)
Item Dimension (L”xW”xH”)
NA

Weight
49 lbs

Warranty Information
1 year

Reviews

There are no reviews yet.

Be the first to review “Supermicro System SYS-1029TP-DTR 1U Xeon LGA 3647 up to 2TB DDR4 4×3.5 inch Hot Swap SATA3 Brown Box”

Your email address will not be published. Required fields are marked *