Key Features
– Compute Intensive Applications
– HPC, Data Center, Enterprise Server
– Hyperscale / Hyperconverged
Four hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:
1. Single AMD EPYCâ„¢ 7002 Series Processor
2. Up to 2TB ECC 3DS LRDIMM,
up to DDR4-3200MHz; 8 DIMM slots
3. 2 PCI-E 4.0 x16 (LP) slot;
1 SIOM card support
(flexible networking)
Note: must bundle with Network card
4. Integrated IPMI 2.0 + KVM with 
dedicated LAN
• Software Out of Band License key
(SFT-OOB-LIC) included for
OOB BIOS management
5. 3 Hot-swap 3.5″ SATA3 drive bays
M.2 Interface: 4 SATA/PCI-E 4.0 x4
M.2 Form Factor: 2280, 22110, 2260, 2242
M.2 Key: M-key
6. Video via Aspeed AST2500 BMC
7. 2000W Redundant Power Supplies
Titanium Level (96%)
(Full redundancy based on
configuration and application load)
Motherboard (per Node)
Super H12SST-PS
Processor/Chipset (per Node)
CPU
Single AMD EPYC 7002 Series Processor
Socket SP3
Supports CPU TDP/cTDP up to 225W
Cores
Up to 64 Cores
Note 225W CPUs are supported under certain conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization
System Memory (per Node)
Memory Capacity
8 DIMM slots
Supports up to 2TB Registered ECC DDR4 3200MHz SDRAM in 8 DIMMs
8-channel memory bus
Memory Type
DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs
Memory Sizes
8GB, 16GB, 32GB, 64GB, 128GB, 256GB
Memory Voltage
1.2V
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
On-Board Devices (per Node)
Chipset
System on Chip
Storage
SATA3 (6Gbps) via AMD EPYC
Network
1 PCI-E 4.0 x16 SIOM LAN Networking Slot for flexible networking, see SIOM LAN options support matrix (Must bundle with at least one SIOM network card)
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Video
ASPEED AST2500 BMC
Input / Output (per Node)
LAN
Provided via SIOM (optional)
1 RJ45 Dedicated IPMI LAN port
USB
2 USB 3.0 ports (rear)
1 USB 2.0 port (Type A)
Video
1 VGA port
DOM
1 SuperDOM (Disk on Module) port
Others
2 COM ports (header)
1 TPM 2.0 header
System BIOS (per Node)
BIOS Type
AMI 128Mb SPI Flash ROM
Management (per Node)
Software
IPMI 2.0
KVM with dedicated LAN
SSM, SUM
SuperDoctor 5
Watch Dog
Power Configurations
ACPI / APM Power Management
Chassis
Form Factor
2U Rackmount
Model
CSE-827HQ+-R2K04BP2
Available Colors
Black
Front Panel (per Node)
Buttons
Power On/Off button
UID button
LEDs
Power status LED
HDD activity LED
Network activity LEDs
Universal Information (UID) LED<
Expansion Slots (per Node)
PCI-Express
2 PCI-E 4.0 (x16) Low-profile slots
1 SIOM card support
(must bundle with network card)
M.2
Interface: 4 SATA/PCI-E 4.0 x4
Form Factor: 2280, 22110, 2260, 2242
Key: M-key
Drive Bays (per Node)
Hot-swap
3 Hot-swap 3.5″ SATA3 drive bays
System Cooling
Fans
4 Heavy duty 8cm PWM fans
Power Supply (76mm Width)
2000W Redundant Power Supplies with PMBus
Total Output Power
1000W/1800W/1980W/2000W
Dimension (W x H x L)
76 x 40 x 336 mm
Input
1000W: 100-127 Vac / 12-9.5 A / 50-60 Hz
1800W: 200-220 Vac / 10-9.5 A / 50-60 Hz
1980W: 220-230 Vac / 10-9.8 A / 50-60 Hz
2000W: 230-240 Vac / 10-9.8 A / 50-60 Hz
2000W: 200-240 Vac / 11.8-9.8 A / 50-60 Hz (UL/cUL only)
+12V
Max: 83.3A / Min: 0A (100-127 Vac)
Max: 150A / Min: 0A (200-220 Vac)
Max: 165A / Min: 0A (220-230 Vac)
Max: 166.7A / Min: 0A (230-240 Vac)
Max: 166.7A / Min: 0A (200-240 Vac)
(UL/cUL only)
+5Vsb
Max: 1A / Min: 0A
Output Type
27 Pairs Gold Finger Connector
Certification
Titanium Level
Operating Environment
RoHS
RoHS Compliant
Environmental Spec.
Operating Temperature:
10oC – 30oC (50oF – 85oF)
All CPU SKUs supported
10oC – 35oC (50oF – 95oF)
Non-operating Temperature:
-40oC to 60oC (-40oF to 140oF)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing)
Item Dimension (L”xW”xH”)
40 x 12 x 27
Weight
94 lbs
Warranty Information
1 year
There are no reviews yet.