Supermicro System AS-1114S-WTRT 1U AMD EPYC7002 SP3 Max.2TB DDR4 10×2.5″Hot-swap Brown Box

Key Features

• DB Processing & Storage

• Data Center Applications

• Firewall Applications

1. Single AMD EPYC™ 7002
Series Processor

2. 8 DIMMs; up to 2TB 3DS ECC
DDR4-3200MHz RDIMM/LRDIMM

3. 2 PCI-E 4.0 x16 (FHFL) slots,
1 PCI-E 4.0* x16 (LP) slot

4. Integrated IPMI 2.0 + KVM with 
dedicated LAN

• Software Out of Band License key
(SFT-OOB-LIC) included for
OOB BIOS management

5. 10 Hot-swap 2.5″ SATA3 drive bays,
Optional 2 U.2 NVMe (PCI-E 3.0)
drive support via additional kit for
NVMe devices

6. 2x 10GBase-T LAN ports via
Broadcom BCM57416 Controller

7. 1 VGA,
7 USB 3.0 (4 rear, 2 front, 1 Type A)

8. 2 SuperDOM (Disk on Module) ports

9. 500W Redundant Power Supplies
Platinum Level High-efficiency

(Full redundancy based on
configuration and application load)
Motherboard
Super H12SSW-NT
Processor/Cache
CPU
Single AMD EPYC^TM 7002 Series Processor
Socket SP3
Support CPU TDP up to 240W
Cores
Up to 64 Cores
System Memory
Memory Capacity
8 DIMM slots
Up to 2TB 3DS ECC DDR4-3200MHz RDIMM/LRDIMM
Memory Type
DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs
On-Board Devices
Chipset
System on Chip
SATA
SATA3 (6Gbps)
Network Controllers
Dual 10GBase-T LAN with via Broadcom BCM57416
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Video
ASPEED AST2500 BMC
Input / Output
SATA
2 SATA3 (6 Gbps) ports
LAN
2 RJ45 10GBase-T ports
1 RJ45 Dedicated IPMI LAN port
USB
7 USB 3.0 ports (4 rear, 2 front, 1 Type A)
Video
1 VGA port
DOM
2 SuperDOM (Disk on Module) ports
System BIOS
BIOS Type
AMI 32Mb SPI Flash ROM
Management
Software
Super Doctor 5
Watch Dog
NMI
SUM
IPMI 2.0, KVM with dedicated LAN
Power Configurations
ACPI / APM Power Management
PC Health Monitoring
CPU
Monitors for CPU Cores, Chipset Voltages, Memory.
4+1 Phase-switching voltage regulator
FAN
Fans with tachometer monitoring
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors
Temperature
Monitoring for CPU and chassis environment
Thermal Control for fan connectors
Chassis
Form Factor
1U Rackmount
Model
CSE-116TS-R504WBP
Available Colors
Black
Front Panel
Buttons
Power On/Off button
UID button
LEDs
Power status LED
HDD activity LED
Network activity LEDs
Universal Information (UID) LED
Expansion Slots
PCI-Express
2 PCI-E 4.0 x16 (FHHL) slots
1 PCI-E 4.0 x16 (LP) slot
2 PCI-E/SATA 3.0 x2 NVMe M.2 slots
Limited Support: On some PCI-E 4.0 devices, it will only run at PCI-E 3.0 speed.
Drive Bays
Hot-swap
10 Hot-swap 2.5″ SATA3 drive bays
Optional 2 U.2 NVMe (PCI-E 3.0) drive support via additional kit for NVMe devices
Peripheral
1 Slim DVD-ROM drive bay (optional)
Backplane
SAS/SATA HDD Backplane
System Cooling
Fans
4 Counter-rotating 4cm PWM fans, 2 fans for cooling AOC
Power Supply
500W Redundant Power Supplies with PMBus
Total Output Power
500W
Dimension (W x H x L)
54.5 x 40.25 x 320 mm
Input
100-240Vac, 50-60Hz, 6.1-2.6A
+12V
Max: 42A / Min: 0.5A
+5Vsb
Max: 4A / Min: 0A
Output Type
Gold Finger Connector Mating with Molex 45984-4343
With Power Distributor
+5V: 25A
+3.3V: 12A
-12V: 0.6A
Certification
Platinum Certified
Operating Environment
RoHS
RoHS Compliant
Environmental Spec.
Operating Temperature:
10^oC – 35^oC (50^oF – 95^oF)
Non-operating Temperature:
-40^oC to 60^oC (-40^oF to 140^oF)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing)
Weight
46.00 LB
Warranty Information
1 year