Supermicro SYS-5019S-W4TR E3-1200v6-v5 S1151 H4 C236 4×3.5″Hot-swap SATA 500W Redundant Platinum Level power supplies Brown Box

• Mainstream, WIO
1. Single socket H4 (LGA 1151) supports
Intel® Xeon® processor E3-1200 v6/v5,
Intel® 7th/6th Gen. Core^TM i3 series,
Intel® Celeron® and Intel® Pentium®
2. Intel® C236 chipset
3. 4 Hot-swap 3.5″ drive bays
4. Up to 64GB Unbuffered ECC UDIMM
DDR4 2400MHz; 4 DIMM slots
5. 1 PCI-E 3.0 x16 left riser slot
6. 4x 10GBase-T ports with Intel® X540,
1 dedicated IPMI port
7. 1 VGA, 1 COM, 2 USB 3.0, 2 USB 2.0
8. 500W Redundant Platinum Level
power supplies
Motherboard
Super X11SSW-4TF
Processor/Cache
CPU:Single Socket H4 (LGA 1151) supports:
Intel Xeon processor E3-1200 v6/v5,
CPU TDP up to 80W
Note:BIOS version 2.0 or above is required to support Intel Xeon Processor E3-1200 v6 series or 7th Generation Intel Core^TM Processors
System Memory
Memory Capacity:4x 288-pin DDR4 DIMM slots
Up to 64GB DDR4 ECC UDIMM
Memory Type:2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs
DIMM Sizes:16GB, 8GB, 4GB
Memory Voltage:1.2 V
Error Detection:Corrects single-bit errors
Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset:Intel C236 chipset
SATA:SATA3 (6Gbps) via C236 controller
RAID 0, 1, 5, 10 support
IPMI:Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2400 BMC
Network Controllers:Quad LAN with Intel X540 10GBase-T Ethernet Controller
Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Video:ASPEED AST2400 BMC
Input / Output
SATA:4 SATA3 (6Gbps) ports
LAN:4 RJ45 10GBase-T LAN ports
1 RJ45 dedicated IPMI LAN port
USB:2 USB 3.0 ports (rear)
2 USB 2.0 ports (rear)
Video:1 VGA port
Serial Port / Header:1 COM ports (1 rear)
SuperDOM:2 SuperDOM (Disk on Module) ports with built-in power
PC Health Monitoring
Voltage:Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
FAN:Total of 6 fan headers supporting up to 6 fans
3 fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature:Monitoring for CPU and chassis environment
CPU thermal trip support
I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
LED:CPU / System Overheat LED
Suspend static indicator LED
UID/Remote UID
Other Features:Chassis intrusion detection
Chassis intrusion header
Chipkill support
RoHS, Halogen Free
Chassis
Form Factor:1U Rackmount
Model:CSE-815TQC-R504WB3
Front Panel
Buttons:Power On/Off button
System Reset button
LEDs:Power LED
Hard drive activity LED
Network activity LEDs
System Overheat LED
Information LED (temp., status)
Expansion Slots
PCI-Express:1 PCI-E 3.0 x16 left riser slot
Drive Bays
Hot-swap:4 Hot-swap 3.5″ SATA3 drive bays
Peripheral Drives
DVD-ROM:1 Slim DVD-ROM drive bay
Backplane
SAS/SATA HDD Backplane
System Cooling
Fans:4x 40x56mm counter-rotation PWM fan
Power Supply with Power Distributor
500W high-efficiency (94+%) power supply w/ PMBus
With Power Distributor:+5V: 25 Amp
+3.3V: 12 Amp
-12V: 0.6 Amp
Certification: Platinum Certified
System BIOS
BIOS Type:8MB SPI Flash EEPROM with AMI BIOS
BIOS Features:DMI 2.3
PCI 2.3
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
Operating Environment / Compliance
RoHS:RoHS Compliant
Environmental Spec.:Operating Temperature: 10^oC to 35^oC (50^oF to 95^oF)
Non-operating Temperature: -40^oC to 70^oC (-40^oF to 158^oF)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)
(SAS support requires optional SAS controller)
Item Dimension (L inchxW inchxH inch)
NA
Weight
35.00lb
Warranty Information
1 Year