Key Features
1.Single socket H4 (LGA 1151) supports Intel® Xeon® processor E3-1200 v6/v5, Intel® 7th/6th Gen. Core™ i3 series, Intel® Celeron® and Intel® Pentium®
2.Intel® C236 chipset
3.Up to 64GB Unbuffered ECC UDIMM DDR4 2400MHz; 4 DIMM slots
4.Expansion slots:
1 PCI-E 3.0 x8 (in x16),
1 PCI-E 3.0 x8,
1 PCI-E 3.0 x4 (in x8)
5.Quad GbE LAN with Intel® i210-AT
6.8 SATA3 (6Gbps) via C236; RAID 0, 1, 5, 10
7.I/O: 1 VGA, 2 COM, TPM header
8.2 SuperDOM with built-in power
9.5 USB 3.0 (2 rear, 2 via header(s), 1 Type A), 6 USB 2.0 (2 rear, 4 via header(s))
10.M.2 NGFF connector
11.Support Intel® VHD with selected CPU
Physical Stats
Form Factor: Micro-ATX
Dimensions: 9.6″ x 9.6″ (24.38cm x 24.38cm)
Processor/Cache
CPU:
Intel 7th/6th Generation Core i3 series, Intel Celeron, Intel Pentium, Intel Xeon processor E3-1200 v6/v5.
Socket H4 (LGA 1151) supported, CPU TDP support 80W
Note: BIOS version 2.0 or above is required to support 7th Generation Intel Core i3 Processors and Intel Xeon Processor E3-1200 v6 series
System Memory
Memory Capacity: 64GB Unbuffered ECC UDIMM, DDR4-2400MHz, in 4 DIMM slots
Memory Type: 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs
DIMM Sizes: 4GB, 8GB, 16GB
Memory Voltage: 1.2V
Error Detection: Corrects single-bit errors
On-Board Devices
Chipset: Intel C236
SATA: Intel C236 controller for 8 SATA3 (6 Gbps) ports RAID 0,1,5,10
IPMI: ASPEED AST2400 BMC
Network Controllers: Quad LAN with Intel Ethernet Controller I210-AT
Graphics: Aspeed AST2400 BMC
Input / Output
USB:
6 USB 2.0 ports (2 rear + 4 headers),
5 USB 3.0 ports (2 rear + 2 headers + 1 Type A)
Video Output: 1 VGA port
Serial Port / Header: 2 COM Ports (1 rear, 1 header)
TPM: TPM Header
Expansion Slots
PCI-E:
1 PCI-E 3.0 x8 (in x16 slot),
1 PCI-E 3.0 x8,
1 PCI-E 3.0 x4 (in x8 slot)
M.2:
M.2 Interface: PCI-E 3.0 x2
Form Factor: 2280
System BIOS
BIOS Type: 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features:
Plug and Play (PnP)
APM 1.2
PCI 2.3
DMI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
USB Keyboard support
Hardware BIOS Virus protection
SMBIOS 2.7.1
UEFI 2.3.1
RTC (Real Time Clock) Wakeup
Management
Software: Intel Node Manager, IPMI2.0, NMI, SPM, SSM, SUM, SuperDoctor 5, Watchdog
Power Configurations:
ACPI Power Management
Power-on mode for AC power recovery
PC Health Monitoring
Voltage: +12V, +3.3V, +5V, +5V standby, Chassis intrusion header, Monitors CPU voltages, Supports system management utility, System level control, VBAT
FAN: 5x 4-pin fan headers (up to 5 fans), Fan speed control, Overheat LED indication, Thermal control tachometer fan connectors
Temperature: PECI, Thermal Monitor 2 (TM2) support, Monitoring for CPU and chassis environment, CPU thermal trip support
LED: CPU / System Overheat LED, UID/Remote UID
Other Features: Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, M.2 NGFF connector, VHD, WOL
Operating Environment
Operating Temperature Range: 0oC – 50oC (32oF – 122oF)
Non-Operating Temperature Range: -40oC – 70oC (-40oF – 158oF)
Operating Relative Humidity Range: 8% – 90% (non-condensing)
Non-Operating Relative Humidity Range: 5% – 95% (non-condensing)
Item Dimension (L”xW”xH”)
10 x 10 x 1
Weight
3 lbs
Warranty Information
3 Years
There are no reviews yet.