Supermicro Motherboard MBD-X11SAE-F-O Xeon E3-1200 v5 LGA1151 Socket H4 C236 PCI Express SATA ATX Brown Box

Features:

1. Single socket H4 (LGA 1151) supports Intel Xeon processor E3-1200 v5, Intel 6th Gen. Core i7/i5/i3 series

2. Intel C236 chipset

3. Up to 64GB Unbuffered ECC/non-ECC UDIMM DDR4 2133MHz; 4x DIMM slots

4. 2x PCI-E 3.0 x16 (run at 16/NA or 8/8), 2x PCI-E 3.0 x1, and 2x 5V PCI 32-bit slots

5. Single GbE LAN with Intel i210-AT (Share with IPMI); single GbE LAN with Intel i219LM

6. 8x SATA3 (6Gbps) via C236; RAID 0, 1, 5, 10 + 1 PCIe M.2 (PCIe x4, 2242/2260/2280)

7. I/O: 1x VGA, 2x COM, TPM 1.2 header

8. 2x SuperDOM with built-in power

9. 6x USB 3.0 (2 rear + 4 via header) 6x USB 2.0 (2 rear + 6 via headers) 2x USB 3.1 (10Gbps, rear)
Form Factor
ATX
Processor/Cache
CPU:
– Single Socket H4 (LGA 1151) Supports:
– Intel Xeon processor E3-1200 v5, Intel 6th Gen Core i7/i5/i3 series processors
CPU TDP up to 95W
System Memory
Memory Capacity:
– 4x 288-pin DDR4 DIMM slots
– Up to 64GB DDR4 ECC UDIMM
Memory Type:
– 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs
DIMM Sizes:
– 16GB, 8GB, 4GB
Memory Voltage:
– 1.2V
Error Detection:
– Corrects Single-Bit Errors
– Detects Double Bit Errors (Using ECC Memory)
On-Board Devices
Chipset:
– Intel C236 Chipset
SATA:
– SATA3 (6Gbps) via C236 Controller
– RAID 0, 1, 5, 10 Support
IPMI:
– Support for Intelligent Platform Management Interface v.2.0
– IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
– ASPEED AST2400 BMC
Network Controllers:
– Intel I210-AT (share with IPMI) + Intel PHY i219LM Ethernet Controllers
– Virtual Machine Device Queues reduce I/O overhead
– Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics:
– ASPEED AST2400 BMC
Input/Output
SATA:
– 8 x SATA 3 (6Gbps) Ports
LAN:
– 2x RJ45 Gigabit Ethernet LAN ports (1 shared with IPMI)
USB:
– 6x USB 3.0 ports (2 rear + 4 via headers)
– 6x USB 2.0 ports (2 rear + 4 via headers)
– 2x USB 3.1 (rear)
Video:
– 1 DVI – D, 1 DP (Display Port), 1 HDMI, 1 VGA (for IPMI only)
Audio:
– ALC 888S HD Audio
Serial Port / Header:
– 2 x COM Ports (2 Headers)
SuperDOM:
– 2x SuperDOM (Disk on Module) ports with built-in power
TPM:
– 1 x TPM 1.2 20-Pin Header
Expansion Slots
PCI-Express:
– 2x PCI-E 3.0 x16 slots (run at 16/NA or 8/8)
– 2x PCI-E 3.0 x1 slots
– 2x 5V PCI 32bit slots
System BIOs
BIOs Type: 128Mb SPI Flash EEPROM with AMI BIOS
BIOs Features:
– Plug and Play (PnP)
– APM 1.2
– DMI 2.3
– PCI 2.3
– ACPI 1.0 / 2.0 / 3.0 / 4.0
– USB Keyboard support
– Hardware BIOS Virus protection
– SMBIOS 2.7.1
– UEFI 2.3.1
– RTC (Real Time Clock) Wakeup
Management
Software:
– IPMI 2.0 with KVM support
– SPM
– SUM
– SMCBU and SMM
– SuperDoctor 5
– vPro
– Watch Dog
Power Configuration:
– ACPI Power Management
– Keyboard Wakeup from Soft-Off
– CPU Fan auto-off in sleep mode
– Power-on mode for AC power recovery
PC Health Monitoring
Voltage:
– Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
FAN:
– Total of 5 fan headers supporting up to 5 fans
– 5 fans with tachometer status monitoring
– Status monitor for speed control
– Status monitor for on/off control
– Low noise fan speed control
– Pulse Width Modulated (PWM) fan connectors
Temperature:
– Monitoring for CPU and chassis environment
– CPU thermal trip support
-I2C temperature sensing logic
– Thermal Monitor 2 (TM2) support
– PECI
LED:
– CPU / System Overheat LED
– Suspend static indicator LED
– UID/Remote UID
Other Features:
– Chassis intrusion detection
– Chassis intrusion header
– Chipkill support
– RoHS
Weight
3.00 lb

Warranty Information
1 Year