, ,

SIIG Accessory JU-SA0S12-S1 2.5 inch USB3.0 to SATA Hard Drive with SD Reader Enclosure


Out of stock


Out of stock

SIIG’s USB 3.0 to SATA Hard Drive with SD Reader Enclosure – 2.5″ allows you to add a 2.5” SATA HDD/SSD to your computer through a single USB connection. It instantly increases up to 4TB storage capacity to your system, delivers SuperSpeed data transfer rate of up to 5Gb/s and supports USB Attached SCSI Protocol (UASP) to improve reading and writing speed for optimal performance. It is also integrated with SD/MicroSD memory card slots to support various storage media, allowing convenient data transfer between computer and mobile devices such as tablet, smartphone, camera, music player and more. This USB 3.0 all-in-one SATA Hard Drive with SD Reader Enclosure is an excellent mobile storage solution to improve storage capacity, support multiple SD/Micro-SD storage media and increase productivity.


• All-in-one 2.5″ SATA HDD/SSD enclosure and SD/MicroSD memory card reader allows you to easily access various storage media through a single USB connection

• Compatible with 9.5mm and 7mm height 2.5″ SATA I/II/III disk drives

• SuperSpeed USB 3.0 supports data transfer rates up to 5Gb/s and supports UASP for optimal performance

• Supports SDHC (UHS-I), SDXC (UHS-I), microSD (T-Flash), microSDHC (UHS-I), and microSDXC (UHS-I) flash memory cards

• Tool-less disk drive installation and low profile design provides great portability

• Supports plug-n-play, hot-swapping and backward compatible with USB 2.0/1.1

• Built-in LED indicators for power and memory card reader status
Chipset: ASM1153E+GL 3224
Compliant with Universal Serial Bus 3.0 Specification
Compliant with Serial ATA Specification 3.0
Supports USB 3.0 data transfer rates up to 5Gb/s
(Note: For maximum data throughput, use a SATA 6Gb/s hard disk with the enclosure and connect to a USB 3.0 5Gbps port. Data throughput is dependent on system hardware and actual performance may be less.)
Supports high performance UASP (USB Attached SCSI Protocol)
(Note: USB 3.0 host driver needs to support UASP in order to take advantage of this feature. Currently, only Windows 10 and 8 native USB 3.0 host driver supports UASP.)
Supports up to 4TB hard disk capacity
(Note: Windows 2000, XP (32-bit), Server 2003 (32-bit) cant support more than 2TB capacity. This is an OS limitation.)
Drive type
Form factor: 2.5 inches
Supports up to 2TB memory card capacity
Memory card types
Number 1 SD v1.0/ v1.1/ v2.0/ SDHC/ SDXC
Number 2 SD v3.01 UHS-I (Ultra High Speed): SDR12/ SDR25/ SDR50/ DDR50/ SDR104
USB Bus-powered
Housing material
Plastic housing and Aluminum panel
Black with blue
USB 3.0 Micro-B (10-pin), Female, External
SATA data and power connector (7+15 pin), Internal
1x SD card slot
1x Micro-SD slot
Environmental conditions
Operating temperature: 32 to 104 degrees F
Storage temperature: 14 to 122 degrees F
Relative humidity: 10% to 90% RH (non-condensing)
Certifications/Standards: FCC, CE, RoHS
Desktop or notebook computer with an available USB port (USB 3.0 port recommended)
Windows 10 (32-/64-bit) / 8 (32-/64-bit) / 7 (32-/64-bit) / Vista (32-/64-bit) / XP (32-/64-bit)
Windows Server 2003 2008 (32-/64-bit) / 2008 R2 / 2012 / 2012 R2
Mac OS X v10.6.x or later
Package Contents
USB 3.0 to SATA Hard Drive with SD Reader Enclosure – 2.5″ (w/ protective silicon sleeve)
USB 3.0 Type A to Micro-B cable
User Reference Guide
Item Dimension (L inchxW inchxH inch)
2 x 5 x 8


Warranty Information
2 Years

Based on 0 reviews

0.0 overall

Be the first to review “SIIG Accessory JU-SA0S12-S1 2.5 inch USB3.0 to SATA Hard Drive with SD Reader Enclosure”

There are no reviews yet.