, ,

Shuttle System NC03U3 i3-7100U Mini Barebone PC Support 4K HD Video DDR4 Max 32GB

Shuttle
Availability:

Out of stock


$429.95

Out of stock

Shuttle’s XPC nano Series gets a performance boost
The NC03U series is powered by Intel’s power-saving ULV (ultra-low-voltage) processors of the Kaby Lake generation. Compared with the NC02U series, it brings higher clock frequencies, improved graphics performance and support of faster DDR4 memory up to 2x 16 GB. Furthermore, one 2.5″ drive up to 15 mm in height as well as one M.2-2280 NVMe SSD card can be installed. The DisplayPort connector delivers video resolutions of up to 4K at 60 frames per second while a second display can be connected via HDMI. USB peripherals use either the type A or type C ports. Professional users will appreciate Intel Gigabit-LAN and one serial port which indicates what purposes the NC03U series is mainly intended for: Digital Signage, POS, control, office or even multimedia.
Chassis
Barebone PC with a black plastic chassis
Dimensions: 142 x 142 x 42 mm (LWH) 847 ml
Weight: 0.4 kg net, 1.2 kg gross
Hole for Kensington Lock
Includes vertical stand and 75 / 100 mm VESA mount
Low Power Consumption
Power consumption in idle mode under Windows 10: ca. 5 W
Operation Position
1) Horizontal
2) Vertical with stand
3) VESA-mounted behind an appropriate monitor
Operation System
This barebone system comes without operating system.
It is compatible with:
– Windows 10, 64-bit
– Linux, 64-bit
Processor
Model: Intel Core i3-7100U (ULV)System-on-a-chip architecture (SoC): no chipset required
BGA1356 package – directly soldered onto the mainboard
Code name: Kaby Lake-U (7th Generation Intel Core)
Cores / Threads: 2 / 4
Clock rate: 2.4 GHz
L1/L2/L3 Cache: 128 kB / 512 kB / 3072 kB
Memory controller: DDR4-2133 Dual Channel (1.2 V)
TDP wattage: 15 W maximum
Manufacturing process: 14 nm
Maximum Tjunction Temperature: 100 oC
Supports Hyper-Threading (HT), 64-bit, VT-x (EPT), VT-d, Enhanced SpeedStep, NX bit, AES-NI, SSE 4.1/4.2
Integrated graphics engine
Cooling Fan
Built-in CPU cooling fan with 4-pin connector
Supports temperature-controlled RPM fan speed
Integrated Graphics
Intel HD graphics 620
GPU clock frequency: 300-1000 MHz
Execution Units (EUs): 24
Two digital audio/video ports support two independent screens (dual monitoring):
Supports Ultra HD / 4K resolution at 3840 x 2160 Pixels
1) DisplayPort 1.2 1 supports Ultra HD 60 Hz
2) HDMI 1.4b supports Ultra HD 30 Hz
Mainboard / BIOS
AMI BIOS in 8 MByte EEPROM with SPI interface
Supports resume after power failure
Supports Wake on LAN (WOL)
Supports Power on by RTC Alarm
Supports booting from USB devices and SD card reader
Supports hardware monitoring and watch dog function
Supports Unified Extensible Firmware Interface (UEFI)
Power Adapter
External 65 W power adapter (fanless)
Input: 100-240 V AC, 50/60 Hz, max. 1.6 A
Output: 19 V DC, max. 3.42 A, max. 65 W
DC Connector: 5.5 / 2.5 mm (outer/inner diameter)
Memory support
2x SO-DIMM slots with 260 pins
Supports DDR4-2133 (PC4-17000) SDRAM at 1.2 V
Supports Dual Channel mode
Supports a maximum of 16 GB per DIMM, maximum total size: 32 GB
Supports two unbuffered DIMM modules (no ECC or registered)
2.5″ Drive Bay
Supports one Serial ATA hard disk or one SATA SSD drive in 6.35 cm / 2.5″ format
Device height: 15 mm (max.)
Supports Serial-ATA III, 6 Gb/s (600 MB/s) bandwidth
Card Reader
Integrated SD card reader
Supports SD, SDHC and SDXC memory flash cards
Supports booting from SD card
M.2 Slot for SSDs
The M.2 2280 BM slot provides the following interfaces:
– PCI-Express Gen. 2.0 X4 with up to 32 Gbps Data Transfer Speed
– SATA v3.0 (max. 6 Gbps)
It supports M.2 cards with a width of 22 mm and a length of 42, 60 or 80 mm (type 2242, 2260, 2280).
Supports M.2 SATA SSDs (with B+M key) and M.2 PCIe SSDs (with M key)
Audio
Audio Realtek ALC 662 High-Definition Audio Codec
3.5 mm / 4-pole combo audio connector for headphones and microphone 2
Digital multi-channel audio output: via HDMI and DisplayPort
Gigabit LAN
Ethernet Controller Intel i211
Supports 10 / 100 / 1.000 MBit/s operation (Gigabit)
Supports WAKE ON LAN (WOL)
Supports network boot by Preboot eXecution Environment (PXE)
IEEE 802.3az Energy Efficient Ethernet (EEE)
Interface: PCIe v2.1
Wireless LAN
Built-in M.2-2230-A/E WLAN card and internal antenna
Single-Chip 1T1R WLAN Controller Realtek RTL8188EE
Supports IEEE 802.11b/g/n, max. 150 Mbps up-/downstream
Security: WPA/WPA2(-PSK), WEP 64/128 bit, IEEE 802.11x/i
Front Panel connectors
USB 3.0 type A
USB 3.0 type C
SD card reader (supports SD, SDHC, SDXC)
Power button
Power LED (blue, flashing when in suspend mode)
HDD LED (orange)
Back Panel connectors
DisplayPort 1.2 1
HDMI 1.4b
2x USB 2.0
Gigabit LAN (RJ45)
Audio Combo Port for headphones and microphone (3.5 mm jack, 4-pole) 2
DC-input connector for external power adapter
2x perforation for optional external WLAN antennas
Left Side connectors
Serial RS232 COM port (D-Sub, 9-pin)
Note: The serial connector (COM port) cannot be used if the NC03U3 is operated in vertical position.
Always-On Jumper
By removing Jumper JP1 (please refer to the Quick Installation Guide)
the system will start unconditionally once power is applied. 4

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Shuttle System NC03U3 i3-7100U Mini Barebone PC Support 4K HD Video DDR4 Max 32GB”

There are no reviews yet.