, ,

Shuttle Syatem DS77U3 Kabylake i3-7100U Max.32GB Dual Gigabit LAN Fanless XPC Slim

Shuttle
Availability:

Out of stock


$506.95

Out of stock

Fanless Slim PC with a Kaby-Lake-U processor in industrial design

The DS77U3 is a fanless slim PC with a robust 1.3 litre metal chassis and exceptional connectivity: 2x HDMI, DisplayPort, Dual Intel LAN, USB 3.0/2.0, serial ports, audio, card reader and integrated W-LAN. Installation of components goes straight forward, as there is plenty of interior space for two memory modules, a 2.5″ drive and an M.2-2280 SSD card. The built-in Dual Core Intel “Kaby-Lake-U” processor with integrated graphics provides ample performance for playback of 4K content. Thanks to its re-designed passive cooling architecture, the system is virtually maintenance-free and is approved for 24/7 nonstop operation. It is big on performance, yet extremely energy-efficient. The Shuttle XPC slim Barebone DS77U3 is an ideal platform for professional applications such as digital signage, POS, Kiosk, Thin Client, Cloud Computing, Office PC and Multimedia.

• High-resolution DisplayPort

• HDMI interface

• Multiformat card reader

• Dual network connection

• The fastest connection to external peripheral devices available to date

• Pre-assembled cabling saves time

• Intel chipset inside

• Anti-theft protection

• You can rely on SSD

• Just 2.5″ HDDs
Fanless and Silent
Passive cooling, no fan noise at all
Perfect to be used in noise-sensitive environments
Fanless, dust-free and thus virtually maintenance-free
Low Power Consumption
Power consumption in idle mode under Windows 10: ca. 78 W only
24/7 Nonstop Operation
This device is approved for 24/7 permanent operation.
Requirements:
– Free circulation of air amongst the PC must be guaranteed.
– Ventilation holes must stay clear.
– If a hard disk is installed, this must also be approved for permanent operation by its manufacturer
Chassis
Slim-PC (Nettop) with black chassis made of steel
Without cooling fan, passive cooling only
The bays for memory, 2.5″ drive and M.2 card can be easily accessed by removing two cover plates.
Two holes for Kensington Lock and numerous threaded holes (M3) at both sides of the chassis
Operation Position
1) Vertical: Usually operated in vertical position with the supplied feet (DisplayPort output facing up).
2) VESA-mounted: The device can also be mounted behind an appropriate monitor using the supplied VESA mount kit.
Note: From a thermal point of view horizontal operation is permitted, however, there are no rubber feet on the device. The maximum operating temperature is 35oC then.
Operation System
This barebone system comes without operating system.
It is compatible with Windows 10 (64-bit) and Linux (64-bit).
Processor
Model: Intel Core i3-7100U (ULV)
System-on-a-chip architecture (SoC): no chipset required
BGA1356 package – directly soldered onto the mainboard
Code name: Kaby Lake-U (7th Generation Intel Core)
Cores / Threads: 2 / 4
Clock rate: 2.4 GHz
L1/L2/L3 Cache: 128 kB / 512 kB / 3072 kB
Memory controller: DDR4-2133 Dual Channel (1.2 V)
TDP wattage: 15 W maximum
Manufacturing process: 14 nm
Maximum Tjunction Temperature: 100oC
Supports Hyper-Threading (HT), 64-bit, VT-x (EPT), VT-d, Enhanced SpeedStep, NX bit, AES-NI, SSE 4.1/4.2
Integrated graphics engine
Integrated Graphics
Intel HD graphics 620
GPU clock frequency: 300 to 1000 MHz
Execution Units (EUs): 24
Three digital audio/video ports support three independent screens:
Supports Ultra HD / 4K resolution at 3840 x 2160 Pixels
1) DisplayPort 1.2 2,7 supports Ultra HD at 60 Hz
2) 2x HDMI 1.4b supports Ultra HD at 30 Hz
Note: the DisplayPort of DS77U3 does not support audio output
Mainboard / BIOS
Shuttle Mainboard FS77
All capacitors are high quality solid capacitors
Supports resume after power failure
Supports Wake on LAN (WOL)
Supports Power on by RTC Alarm
Supports boot from M.2 SSD cards, USB devices and SD card reader
AMI BIOS in 8 MByte EEPROM with SPI interface
Supports hardware monitoring and watch dog function
Supports Unified Extensible Firmware Interface (UEFI)
Power Adapter
External 65 W power adapter (fanless)
Input: 100240 V AC, 50/60 Hz, max. 1.6 A
Output: 19 V DC, max. 3.42 A, max. 65 W
Memory support
2x SO-DIMM slots with 260 pins
Supports DDR4-2133 (PC4-17000) SDRAM at 1.2 V
Supports Dual Channel mode
Supports a maximum of 16 GB per DIMM, maximum total size: 32 GB
Supports two unbuffered DIMM modules (no ECC or registered)
2.5″ Drive Bay with SATA connector
Supports one Serial ATA hard disk or one SATA SSD drive in 6.35 cm / 2.5″ format
Device height: max. 12.5 mm
Supports Serial-ATA III, 6 Gb/s (600 MB/s) bandwidth
Supports Unified Extensible Firmware Interface (UEFI)
Note: no Serial ATA cable is required
M.2 Slot for SSDs
The M.2 2280 BM slot provides the following interfaces:
– PCI-Express Gen. 3.0 X4 with up to 32 Gbps Data Transfer Speed
– SATA v3.0 (max. 6 Gbps)
It supports M.2 cards with a width of 22 mm and a length of 42, 60 or 80 mm (type 2242, 2260, 2280).
Supports M.2 SATA SSDs (with B+M key) and M.2 PCIe SSDs (with M key)
Card Reader
Integrated SD card reader
Supports SD, SDHC and SDXC memory flash cards
Supports booting from SD card
Audio
Audio Realtek ALC 662 High-Definition Audio
Two analog audio connectors (3.5 mm) at the back panel:
1) 2 channel line out (headphones)
2) microphone input
Digital multi-channel audio output: via HDMI
Dual Gigabit LAN
Dual network with two RJ45 ports
Used network chips:
1) Intel i211 Ethernet Controller with MAC, PHY and PCIe interface
2) Intel i219LM PHY connected to the MAC of the processor
Supports 10 / 100 / 1.000 MBit/s operation
Supports WAKE ON LAN (WOL)
Supports network boot by Preboot eXecution Environment (PXE)
Supports Teaming mode
Wireless Network (WLAN)
Built-in M.2-2230-A/E WLAN card and internal antenna
Single-Chip 1T1R WLAN Controller Realtek RTL8188EE
Supports IEEE 802.11b/g/n, max. 150 Mbps up-/downstream
Security: WPA/WPA2(-PSK), WEP 64/128 bit, IEEE 802.11x/i
Front Panel connectors
2x USB 3.0
2x USB 2.0
2x RS232 serial ports (5V / 12V, 1x switchable to RS422 / RS485) covered with black plastic caps
SD card reader (supports SD, SDHC, SDXC)
Power button
Power LED (blue)
HDD LED (yellow)
Back Panel connectors
DisplayPort 1.2
2x HDMI 1.4b
2x USB 2.0
2x Intel Gigabit LAN (RJ45)
Microphone input
Audio Line-out (headphones)
DC-input connector for external power adapter
4-pin connector “SW2” (2.54 mm pitch) for power button, Clear CMOS and 5 V DC
Always-On Jumper
By removing Jumper J9 (please refer to the quick user guide) the system will start unconditionally once power is applied.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Shuttle Syatem DS77U3 Kabylake i3-7100U Max.32GB Dual Gigabit LAN Fanless XPC Slim”

There are no reviews yet.