The TS-673 is powered by a high-performance and energy-efficient AMD R-Series CPU and provides two PCIe slots for greater functionality. You can install a QNAP QM2 expansion card to add M.2 SSD caching/10GbE connectivity a compatible wireless card to use the TS-673 as a wireless access point and an entry-level graphics card to boost system performance for 4K video performance. The TS-673 allows you to flexibly deploy a wide range of applications with a more affordable budget.
Two PCIe Gen3 x4 slots support QM2 cards, 10GbE adapters, or wireless network cards.
Supports entry-level graphics card, allowing for 4K video transcoding and output.
Dual M.2 SATA 6 Gb/s SSD slots allow for setting up caching or storage pools, improving file access efficiency.
Qtier auto-tiering technology and SSD caching enable 24/7 optimized storage efficiency.
Scalable storage supporting virtualization, containerized apps, centralized storage, backup, sharing, and disaster recovery.
Snapshots fully record system status and data. If files are accidentally deleted or modified, you can quickly restore the data from a snapshot.
Processor: AMD R-Series RX-421ND quad-core 2.1 GHz processor, Turbo Core up to 3.4 GHz
Encryption Engine: AES-NI
4 GB DDR4 (2 x 2 GB)
64 GB (4 x 16 GB)
4 x SODIMM DDR4
(For dual- or quad-DIMM configurations, you must use a pair of identical DDR4 modules.)
6 x SATA 6 Gbps
3.5-inch SATA hard disk drives
2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives
M.2 SSD Slot
2 x M.2 2260/2280 SATA 6Gb/s SSDs (Sold separately)
1. The M.2 SSD is not included as standard.
2. M.2 SSD operations can easily generate excessive heat. It is recommended to install a heatsink (from QNAP or a third-party provider) on the M.2 SSD.
SSD Cache Acceleration Support
Drive bays 1 to 6
M.2 slots 1 to 2
Optional: M.2 SSD using QNAP QM2 PCIe expansion card
The following are not hot-swappable: M.2 SSDs, SSD cache drives, SSDs using PCIe expansion slots.
Gigabit Ethernet Port
4 x RJ45
2 x PCIe 3.0 x4
Note: Support full-height 10GbE LAN card, USB 3.1 Gen2 (10Gb/s) expansion card, QM2 card, PCIe wireless network card or a bus-powered graphics card.
4 x USB 3.0 (Front: 1 Back: 3)
2 x 3.5 mm dynamic microphone jacks
1 x 3.5 mm line-out jack
1 x speakers
Note: You cannot use the speakers and the line-out jack simultaneously.
USB One Touch Copy
Front: USB 3.0
Optional QNAP RM-IR004 remote control (MCE compatible)
Power Consumption (W)
HDD standby: 35.11 W
In operation: 63.69 W
(with 6 x 2TB HDDs installed)
Sound pressure (LpAm): 23.0 dB(A)
Power Supply Unit
250W, 100-240V AC, 50/60Hz