Gigabyte Motherboard GA-B250-FinTech Core i7-i5-i3 Max.64GB DDR4 USB ATX

12 Native PCIe Slots For Increased Yield Potential & Dual 12V AUX power connector for PCIe slot

GIGABYTE B250-FinTech is equipped with 12 native PCIe slots giving the miners the opportunity to mine with up to 12 GPUs at the same time for maximum performance. Also, it comes with two 12V AUX power connectors making sure your system will always have the power it needs.

Cost saving combination

The GIGABYTE B250-FinTech not only offers double the GPU support than standard motherboards but at the same time saves you money. Get the same mining performance without having to pay extra money for a second setup. Paying extra money for a second CPU, motherboard, HDD / SDD and memory kit can be costly. That’s what makes the GIGABYTE B250-FinTech the ideal choice for miners!

GIGABYTE Mining Kit

Front Panel Switch Card

Mining racks are an open-case environment. They usually lack the support of Power ON/Reset buttons.

This GIGABYTE module adds Power-On and Reset button on your system making your mining experience smoother.

3-in-1 PSU Power-On Adapter

Modern mining rigs require more than one power supply powering your system at the same time. With the GIGABYTE Power-On adapter you can now connect up to 3 different power supplies in the most simple way. A safer cheaper and easier way than ever before!

GIGABYTE Fine Tuned BIOS Mining Mode- Hassle Free, Optimized Settings

This GIGABYTE exclusive mode elevates your mining efficiency to unprecedented levels. Simply select the BIOS Mining Mode and it will automatically update settings to maximize stability and compatibility with multi-graphical configurations, making mining easier and more efficient than ever.
CPU
1. Support for 7th and 6th generation Intel Core i7 processors/ Intel Core i5 processors/Intel Core i3 processors/ Intel Pentium processors/Intel Celeron processors in the LGA1151 package
2. L3 cache varies with CPU
(Please refer “CPU Support List” for more information.)
Chipset
1. Intel B250 Express Chipset
Memory
1. 4 x DDR4 DIMM sockets supporting up to 64 GB of system memory
2. Dual channel memory architecture
3. Support for DDR4 2400/2133 MHz memory modules
4. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
5. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
6. Support for Extreme Memory Profile (XMP) memory modules
(To support 2400 MHz or XMP memory, you must install a 7th Generation processor.)
(Please refer “Memory Support List” for more information.)
Onboard Graphics
Integrated Graphics Processor- Intel HD Graphics support:
1. 1 x D-Sub port, supporting a maximum resolution of 1920×1200 at 60 Hz
2. 1 x DVI-D port, supporting a maximum resolution of 1920×1200 at 60 Hz
(The DVI-D port does not support D-Sub connection by adapter.)
Maximum shared memory of 1 GB
Audio
1. Realtek ALC887 codec
2. High Definition Audio
3. 2/4/5.1/7.1-channel
(To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.)
LAN
1. Realtek GbE LAN chip (10/100/1000 Mbit)
Expansion Slots
1. 1 x PCI Express x16 slot, running at x16
2. 11 x PCI Express x1 slots
(All of the PCI Express slots conform to PCI Express 3.0 standard.)
Storage Interface
Chipset:
1. 6 x SATA 6Gb/s connectors
(Refer to “1-7 Internal Connectors,” for the installation notices for the M.2 and SATA connectors.)
USB
Chipset:
1. 6 x USB 3.1 Gen 1 ports (4 ports on the back panel, 2 ports available through the internal USB header)
2. 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers)
Internal I/O Connectors
1. 1 x 24-pin ATX main power connector
2. 1 x 8-pin ATX 12V power connector
3. 2 x PCIe power connectors
4. 1 x CPU fan header
5. 3 x system fan headers
6. 6 x SATA 6Gb/s connectors
7. 1 x front panel header
8. 1 x front panel audio header
9. 1 x S/PDIF Out header
10. 1 x USB 3.1 Gen 1 header
11. 2 x USB 2.0/1.1 headers
12. 1 x serial port header
13. 1 x Clear CMOS jumper
Back Panel Connectors
1. 1 x PS/2 keyboard/mouse port
2. 1 x D-Sub port
3. 1 x DVI-D port
4. 4 x USB 3.1 Gen 1 ports
5. 2 x USB 2.0/1.1 ports
6. 1 x RJ-45 port
7. 3 x audio jacks
I/O Controller
1. iTE I/O Controller Chip
H/W Monitoring
1. Voltage detection
2. Temperature detection
3. Fan speed detection
4. Overheating warning
5. Fan fail warning
6. Fan speed control
(Whether the fan speed control function is supported will depend on the cooler you install.)
BIOS
1. 1 x 64 Mbit flash
2. Use of licensed AMI UEFI BIOS
3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
Unique Features
1. Support for APP Center
(Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.)
3D OSD
At BIOS
Ambient LED
AutoGreen
BIOS Setup
Color Temperature
Cloud Station
EasyTune
Fast Boot
Game Boost
ON/OFF Charge
Platform Power Management
Smart Backup
Smart Keyboard
Smart TimeLock
System Information Viewer
USB Blocker
V-Tuner
Support for Q-Flash
Support for Xpress Install
Bundle Software
1. Norton Internet Security (OEM version)
2. cFosSpeed
Operating System
1. Windows 10 64-bit (for 7th Generation Intel Processors)
2. Windows 10 64-bit / Windows 8.1 64-bit / Windows 7 32-bit / 64-bits (for 6th Generation Intel Processors)
(Please download the “Windows USB Installation Tool” from GIGABYTEs website and install it before installing Windows 7.)
Form Factor
1. Micro ATX Form Factor 30.5cm x 20.0cm
Item Dimension (L”xW”xH”)
13 x 11 x 3

Weight
3 lbs

Warranty Information
3 years