, ,

EnGenius Networking EAP1300EXT EnTurbo 11ac Wave 2 Indoor Wireless Access Point with High-Gain Antennas

EnGenius
Availability:

3 in stock (can be backordered)


$95.95

3 in stock (can be backordered)

EnTurbo APs turbocharge wireless performance for small and mid-size businesses. Powerful onboard quad-core processors combine with new 11ac technology to maximize speed, and performance, offering greater user device capacity and connection reliability. EAP1300 delivers next generation, business-class Wi-Fi at exceptional pricing.

• Quad-Core Processor, 717 MHz “Turbo Engine”

• 11ac Wave 2 Speeds to 867 Mbps (5 GHz); to 400 Mbps (2.4 GHz)

• Up to 30% Faster Throughput Over 11ac Wave 1 3×3 APs

• GigE 802.3af PoE-Compliant for Easy Placement Where Power is Limited

• Beamforming Optimizes Antenna Signal, Reception & Reliability for Clients
Standards
IEEE 802.11b/g/n on 2.4 GHz
IEEE802.11a/n/ac on 5 GHz
Processor
Qualcomm 717 MHz Quad-Core CPU
4x ARM Cortex A7
Antennas
2 x 5 dBi Omni-Directional Integrated
Physical Interface
10/100/1000 Gigabit Ethernet Port
DC Jack
Reset Button
Kensington Security Slot
LED Indicators
Power
LAN
2.4 GHz
5 GHz
Power Source
Power-over-Ethernet: 802.3af Input
IEEE 802.11e Compliant Source
12VDC /1A Power Adapter
Maximum Power Consumption
9W
Surge Protection
0.5KV
Wireless and Radio Specifications
Operating Frequency: Dual-Radio Concurrent 2.4 GHz and 5 GHz
Operation Modes:
– Access Point Mode (AP mode)
– WDS: WDS AP, WDS Bridge
Frequency Radio:
– 2.4 GHz: 2400 MHz to 2472 MHz
– 5 GHz: 5150 MHz to 5250 MHz, 5250 MHz to 5350 MHz, 5470 MHz to 5725 MHz, 5725 MHz to 5850 MHz
Transmit Power:
– 2.4 GHz: 23 dBm
– 5 GHz: 23 dBm
Radio Chains/Spatial Stream: 2×2:2
SU-MIMO: Two (2) Spatial Streams SU-MIMO up to 1267 Mbps to a single client
MU-MIMO: Two (2) Spatial Streams MU-MIMO up to 1267 Mbps to two (2) MU-MIMO capable wireless devices simultaneously
Supported Data Rates (Mbps):
– 2.4 GHz: Max 400
– 5 GHz: Max 867
– 802.11b: 1, 2, 5.5, 11
– 802.11a/g: 6, 9, 12, 18, 36, 48, 54
– 802.11n: 6.5 to 400 Mbps (MCS0 to MCS15)
– 802.11ac: 6.5 to 867 Mbps (MCS0 to MCS9, NSS 1 to 2)
Supported Radio Technologies:
– 802.11b: Direct-Sequence Spread Spectrum (DSSS)
– 802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM)
– 802.11n/ac: 2×2 MIMO with 2 Streams
Channelization:
– 802.11ac Supports Very High Throughput (VHT) – VHT 20/40/80 MHz
– 802.11n Supports High Throughput (HT) – HT 20/40 MHz
– 802.11n Supports Very High Throughput (VHT) Under the 2.4 GHz Radio – VHT 40 MHz (256-QAM)
– 802.11n/ac Packet Aggregation: AMPDU, ASPDU
Supported Modulation:
– 802.11b: BPSK, QPSK, CCK
– 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
– 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
Management
Multiple BSSID: Supports 16 SSIDs (8 SSIDs per Band)
VLAN Tagging:
– Supports 802.1q SSID-to-VLAN Tagging
– Cross-Band VLAN Pass-Through
– Management VLAN
Spanning Tree: Supports 802.1d Spanning Tree Protocol
QoS (Quality of Service):
– Compliant With IEEE 802.11e Standard
– WMM
SNMP: v1, v2c, v3
MIB: I/II, Private MIB
Management Features
Deployment Options:
– Stand-Alone (Individually Managed)
– Managed Mode (w/ezMaster and Neutron Switch)
Stand-Alone Management Features:
– Auto Channel Selection
– Auto Transmit Power
– Wireless STA (Client) Connected List
– Guest Network
– Fast Roaming (802.11k and 802.11r)
– Pre-Authentication (802.11i, 802.11x)
– PMK Caching (802.11i)
– RSSI Threshold
– Band Steering
– Traffic Shaping
– VLANs for Access Point – Multiple SSIDs
– Backup/Restore Settings
– Auto Reboot
– E-Mail Alert
– Site Survey
– Save Configuration as Default
Control Features:
– Managed Mode (w/ezMaster/Neutron Switch)
– Distance Control (ACK Timeout)
– Multicast Supported
– Wi-Fi Scheduler
– Client Traffic Status
– RADIUS Accounting (802.1x)
– Power Save Mode (U-APSD Support)
– CLI Support
– HTTPS
Wireless Security:
– WEP Encryption 64/128/152 bit
– WPA/WPA2 Enterprise (WPA-EAP using TKIP or AES)
– Hide SSID in Beacons
– MAC Address Filtering, Up to 32 MACs per SSID
– Wireless STA (Client) Connected List
– SSH Tunnel
– Client Isolation
Wireless Management Features (w/ezMaster and Neutron Switch) (Available in AP Mode)
– AP Auto Discovery and Provisioning
– AP Auto IP Assignment
– AP Group Management
– Auto AP Rebooting
– AP Device Name Editing
– AP Radio Settings
– Band Steering
– Traffic Shaping
– Fast Roaming (802.11k and 802.11r)
– Pre-Authentication (802.11i, 802.11x)
– PMK Caching (802.11i)
– RSSI Threshold
– AP Client Limiting
– Client Fingerprinting
– AP VLAN Management
– VLANs for AP – Multiple SSIDs
– Secured Guest Network
– Access Point Status Monitoring
– Wireless Client Monitoring
– Email Alert
– Wireless Traffic and Usage Statistics
– Real-Time Throughput Monitoring
– Visual Topology View
– Floor Plan View
– Map View
– Wireless Coverage Display
– Secure Control Messaging (SSL Certificate)
– Local MAC Address Database
– Remote MAC Address Database (RADIUS)
– Unified Configuration Import/Export
– Bulk Firmware Upgrade Capability
– One-Click Update
– Intelligent Diagnostics
– Kick/Ban Clients
– Wi-Fi Scheduler
Temperature Range
Operating: 32o F to 104oF (0o C to 40oC)
Storage: -22oF to 176oF (-30oC to 80oC)
Humidity (non-condensing)
Operating: 90% or less
Storage: 90% or less
Package Contents
EAP1300 Indoor Access Point
Power Adapter (12V/1A)
T-Rail Mounting Kits
Ceiling and Wall Mount Screw Sets
Mounting Brackets
RJ-45 Ethernet Cable
Quick Installation Guide
Certifications
FCC, CE
Item Dimension (L inchxW inchxH inch)
12 x 9 x 3

Weight
2.00 lb

Warranty Information
1 Year

SKU: AS202063 Categories: , ,
Weight 2.00 lbs
UPC

MPN

Brand

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “EnGenius Networking EAP1300EXT EnTurbo 11ac Wave 2 Indoor Wireless Access Point with High-Gain Antennas”

There are no reviews yet.