11ac Wave 2 Managed Compact Indoor WiFi Access Point
Accelerated Speeds, Increased User Device Capacities, and Improved Connection Reliability
The EWS330AP is a compact Indoor WiFi Access Point that is also incredibly powerful, providing an improved coverage area, faster connectivity & higher user capacity. Reaching speeds to 867 Mbps on 5 GHz and to 400 Mbps on the 2.4-GHz frequency band, the EWS330AP’s powerful quad-core processor boosts wireless performance and efficiency with up to 30% faster throughput compared with traditional access points.
●11ac Wave 2 Wireless Speeds to 867 Mbps (5 GHz); to 400 Mbps (2.4 GHz)
●Adjustable 26 dBm Radios with 5 dBi Integrated Antennas for Improved Coverage
●Up to 30% Faster Throughput Over 11ac Wave 1 3×3 APs
●MU-MIMO Improves Performance & Increases User Device Capacities
●802.3af PoE Port offers easy placement where power outlets are unavailable
Technical Specifications
– Standards
IEEE 802.11b/g/n on 2.4 GHz
IEEE 802.11a/n/ac on 5 GHz
– Processor
Qualcomm 717 MHz Quad-Core CPU
4x ARM Cortex A7
– Antenna
2 x 2.4 GHz: 5 dBi
2 x 5 GHz: 5 dBi
Integrated Omni-Directional Antenna
– Physical Interface
1 x 10/100/1000 BASE-T, RJ-45 Gigabit Ethernet Port
1x DC Jack
1 x Reset Button
– LED Indicators
1 x Power / 2.4 GHz/5GHz
– Power Source
Power-over-Ethernet: 802.3af Input
IEEE 802.11e Compliant Source
12VDC /1A Power Adapter (not included)
– Maximum Power Consumption
9W
– Surge Protection
0.5KV
Wireless and Radio Specifications
– Operating Frequency
Dual-Radio Concurrent 2.4 GHz and 5 GHz
– Operation Modes
Access Point Mode
Mesh Mode
– Frequency Radio
2.4 GHz: 2400 MHz – 2472 MHz
5 GHz: 5150 MHz – 5250 MHz, 5250 MHz – 5350 MHz, 5470 MHz – 5725 MHz, 5725 MHz – 5850 MHz
– Transmit Power
Up to 26 dBm on 2.4 GHz
Up to 26 dBm on 5 GHz
– Tx Beamforming (TxBF)
– Radio Chains/Spatial Stream
2×2:2
– SU-MIMO
2.4 GHz – Two (2) Spatial Stream SU-MIMO up to 400 Mbps to individual 2×2 VHT40 client devices (300 Mbps for HT40 802.11n client devices)
5 GHz – Two (2) Spatial Stream SU-MIMO up to 867 Mbps to individual 2×2 VHT40 client devices
– MU-MIMO
Two (2) Spatial Stream MU-MIMO up to 867 Mbps to two (2) MU-MIMO capable wireless devices simultaneously
– Supported Data Rates (Mbps):
2.4 GHz: Max 400
5 GHz: Max 867
802.11b: 1, 2, 5.5, 11
802.11a/g: 6, 9, 12, 18, 36, 48, 54
802.11n: 6.5 to 400 Mbps (MCS0 to MCS15)
802.11ac: 6.5 to 867 Mbps (MCS0 to MCS9, NSS equals 1 to 2)
– Supported Radio Technologies
802.11b: Direct-Sequence Spread Spectrum (DSSS)
802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM)
802.11n/ac: 2×2 MIMO with 2 Streams
– Channelization
802.11n Supports High Throughput (HT)-HT 20/40 MHz
802.11n Supports Very High Throughput (VHT) Under the 2.4 GHz Radio-VHT 40 MHz (256-QAM)
802.11n/ac Packet Aggregation: AMPDU, ASPDU
802.11ac Supports Very High Throughput (VHT)-VHT 20/40/80 MHz
– Supported Modulation
802.11b: BPSK, QPSK, CCK
802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
Management
– Multiple BSSID
Supports 16 SSIDs (8 SSIDs per Band)
– VLAN Tagging
Supports 802.1q SSID-to-VLAN Tagging
Cross-Band VLAN Pass-Through
Management VLAN
– Spanning Tree
Supports 802.1d Spanning Tree Protocol
– QoS (Quality of Service)
Compliant with IEEE 802.11e Standard
WMM
– SNMP
v1, v2c, v3
– MIB
I/II, Private MIB
Management Features
– Deployment Options
Stand-Alone (Individually Managed)
Managed Mode (with Neutron Series Switch/ezMaster)
– Stand-Alone Management Features
Auto Channel Selection
Auto Transmit Power
Wireless STA (Client) Connected List
Guest Network
Fast Roaming (802.11k and 802.11r)
Pre-Authentication (802.11i, 802.11x)
PMK Caching (802.11i)
RSSI Threshold
Band Steering
Traffic Shaping
VLANs for Access Point – Multiple SSIDs
Backup/Restore Settings
Auto Reboot
E-Mail Alert
Site Survey
Save Configuration as Default
– Wireless Management Features (With ezMaster and Neutron Switch)
AP Auto Discovery and Provisioning
AP Auto IP Assignment
AP Group Management
Auto AP Rebooting
AP Device Name Editing
AP Radio Settings
Band Steering
Traffic Shaping
Fast Roaming (802.11k and 802.11r)
Pre-Authentication (802.11i, 802.11x)
PMK Caching (802.11i)
RSSI Threshold
AP Client Limiting
Client Fingerprinting
AP VLAN Management
VLANs for AP – Multiple SSIDs
Secured Guest Network
Access Point Status Monitoring
Wireless Client Monitoring
Email Alert
Wireless Traffic and Usage Statistics
Real-Time Throughput Monitoring
Visual Topology View
Floor Plan View
Map View
Wireless Coverage Display
Secure Control Messaging (SSL Certificate)
Local MAC Address Database
Remote MAC Address Database (RADIUS)
Unified Configuration Import/Export
Bulk Firmware Upgrade Capability
One-Click Update
Intelligent Diagnostics
Kick/Ban Clients
Wi-Fi Scheduler
– Control Features
Managed Mode (w/Neutron Switch/ezMaster)
Distance Control (ACK Timeout)
Multicast Supported
Wi-Fi Scheduler
Client Traffic Status
RADIUS Accounting (802.1x)
Power Save Mode (U-APSD Support)
CLI Support
HTTPS
– Wireless Security
WEP Encryption 64/128/152 bit
WPA/WPA2 Enterprise (WPA-EAP Using TKIP or AES)
Hide SSID in Beacons
MAC Address Filtering, Up to 32 MACs per SSID
Wireless STA (Client) Connected List
SSH Tunnel
Client Isolation
Environmental and Physical
– Temperature Range
Operating: 32oF-104oF (0 oC-40 oC)
Storage: -22 oF-176 oF (-30 oC-80 oC)
– Humidity (non-condensing)
Operating: 90% or less
Storage: 90% or less
Package Contents
3 – EWS330AP Dual-Band AC1300 Indoor Access Points
3 – T-Rail Mounting Kits
3 – Ceiling and Wall Mount Screw Kits
3 – Mounting Brackets
3 – RJ-45 Ethernet Cables
1 – Quick Installation Guide
Certifications
FCC
CE
Item Dimension(L inchxW inchxH inch)
6 x 6 x 2
Weight
1.00lb
Warranty Information
1 Year
There are no reviews yet.