Edge-core Switch 7312-54XS-O-AC-F-US 48Port 25GB SFP28 with 6x100GB QSFP

The Edgecore AS7312-54XS switch is a Top-of-Rack (TOR) or spine switch for high-performance data centers. In a compact 1RU form factor, the switch provides line-rate L2 and L3 switching across the 48 x 25GbE SFP28 with 6 x 100GbE QSFP28, supporting up to 48 x 10/25 GbE, 6 x 40/100 GbE connections. The AS7312-54XS can be deployed as a TOR switch supporting 10/25 GbE to servers with 40/100 GbE uplinks, or as a spine switch supporting 40/100 GbE spine interconnects. This open network switch is loaded with the Open Network Install Environment (ONIE) which supports the installation of compatible Network Operating System software, including the open source options Open Network Linux and OpenSwitch, plus commercial NOS offerings.
Ports
Switch Ports:
48 x 25G SFP28 plus 6 x 100G QSFP28 ports:
Each SFP28 supports 1 x 10 G or 25 GbE
Each QSFP28 supports 1×40/100 GbE or 4 x 25 GbE or
4 x 10 GbE per port using splitter cables
Management ports on port side:
1 x RJ-45 serial console
1 x RJ-45 100/1000BASE-T management
1 x USB Type A storage
Key Componets
Switch Silicon: Broadcom BCM56967 Tomahawk+
No PHYs, No Retimers
CPU Modules:

DDR3: 8 GB x 2 SO-DIMM with ECC
SPI NOR Flash: 8 MB x 2
mSATA: 32 GB MLC
Performance
Switching Capacity: 3.6 Tbps full duplex
Forwarding Rate: 2.6 Bpps
Jumbo frames support up to 9216 Bytes
Packet Buffer Size: 22 MB integrated packet buffer
Subject to NOS:
MAC Addresses: 8K min./136K max.
VLAN IDs: 4 K
IPv4/32: 16 K L3 LPM entries with TCAM-only mode
IPv6/64: 8 K L3 LPM entries with TCAM-only mode
IPv6/128: 4 K L3 LPM entries with TCAM-only mode
Software
Diagnostics
Compatible with the following NOS options:
Open Network Linux, the open-source, OCP reference NOS
Compatible with Cumulus Linux r3.6 and later version
Compatible with PicOS from Pica8 Inc
LEDs
10G SFP+ Port LEDs: Link Speed, Link Status, Activity
25G SFP28 Port LEDs: Link Status, Activity for 25G status
100G QSFP28 Port LEDs: Link Status, Activity for 100G status
100G QSFP28 Breakout LEDs: show Link, Status, Activity
with 4 x 25G breakout
Ethernet Management Port LED: Link Status, Activity
System LEDs: Diagnostic, Locator, PSU and Fan Status
Power
PSUs: 2 redundant, load-sharing, hot-swappable AC or -48 VDC
Input Voltage: 90 to 240 VAC at 50-60 Hz. -36 to -72 VDC
PSU Efficiency: Up to 93% for AC PSUs
Power input option: 12 VDC
The total estimated power budget is around 511 W
Item Dimension (L inchxW inchxH inch)
18 x 19 x 2
Weight
20.78lb
Warranty Information
3 Year