The DGS-3130 Series is a range of Lite Layer 3 Stackable Managed Switches designed to help connect end-users in a secure enterprise or metro Ethernet access network. These switches support multicast and enhanced security features, making them an ideal Gigabit access layer solution. The DGS-3130-30TS/54TS provide 24 or 48 10/100/1000 Mbps Gigabit Ethernet ports. The DGS-3130-30PS/54PS provide 24 or 48 10/100/1000 Mbps Power over Ethernet (PoE) Gigabit Ethernet ports. The DGS-3130-30S/54S provide 24 or 48 SFP Gigabit Ethernet ports. Each 10/100/1000 Mbps port on the DGS-3130-30PS/54PS supports the IEEE 802.3af and IEEE 802.3at PoE standards. The default power budget for these models is 370 watts and can be expanded to 740 watts with the DPS-700 redundant power supply. The switches are also equipped with a USB 2.0 port, allowing the user to boot images and upload configuration files directly, as well as conveniently save syslog files to an USB 2.0 storage device.
Enhanced Network Reliability
Comprehensive Security Features
Easy Access Control Policies
Power over Ethernet Support
Versatile Traffic Management
• Stackable Fully Managed Switch
• 24 x 10/100/1000 RJ45 ports
• 2 x 10GBASE-T RJ45 ports
• 4 x 10GbE SFP+ ports
• Embedded 6 kV surge protection on all Gigabit Ethernet ports
• L3 Features include VRRP, Static Route and RIPv1/v2/ng
General
Hardware version is A
– Ports
24 x 10/100/1000BASE-T ports
2 x 10GBASE-T ports
4 x 10G SFP+ ports
– Optional Redundant Power Supply
DPS-500A
– Console Port
10/100/1000BASE-T RJ-45 port for out-of-band CLI management
– Management Port
10/100/1000BASE-T RJ-45 port for out-of-band IP management
Stacking Ports is equal to 4
– Stacking CostNOTE
1
– USB Ports
1 x USB 2.0 Type A port
Performance
– Switching Capacity
168 Gbps
– 64-Byte Packet Forwarding Rate
125 Mpps
– Packet Buffer Memory
2 MB
Physical and Environmental
– MTBF (Hours)
900,546 hours
– Acoustics
Max: 52.5 dB / Min: 33.5 dB
– Heat Dissipation
104.65 BTU/h
– Power Input
100 to 240 VAC, 50 to 60 Hz
– Max Power Consumption
30.76 W
– Ventilation
1 x Smart fan
– Operation Temperature
0oC to 50oC (32oF to 122oF)
– Storage Temperature
-40oC to 70oC (-40oF to 158oF)
– Operating Humidity
10% to 90% RH
– Storage Humidity
5% to 90% RH
– Emission (EMI)
FCC Class A, CE Class A, VCCI Class A, IC, RCM, BSMI, CCC
– Safety
CB, cUL, BSMI, CCC
Software Features
Stackability
– Physical stacking:
Stacking Lite
Up to 9 units per stack or up to 12 stacking cost per stackNOTE
– Virtual stacking:
D-Link Single IP Management (SIM)
Up to 32 units per virtual stack
L2 Features
– MAC Address Table: 16K (16,384) entries
– Flow Control:
802.3x Flow Control
HOL Blocking Prevention
– Jumbo Frames up to 9 Kbytes
– 802.3ad Link Aggregation:
Max. 32 groups per device, 8 Gigabit ports per group
– Spanning Tree Protocols:
802.1D STP
802.1w RSTP
802.1s MSTP
BPDU Filtering
Root Restriction
– Loopback Detection
– Port Mirroring:
One-to-One
Many-to-One
Flow-based
RSPAN Mirroring
– Ethernet Ring Protection Switching (ERPS):
Single ring topology
L2 Multicasting
– IGMP Snooping:
IGMP v1/v2/v3 Snooping
Supports 1024 IGMP groups
Port/Host-based IGMP Snooping Fast Leave
– Limited IP Multicast:
Up to 24 IGMP filtering profiles, 128 ranges per profile
– Double VLAN Q-in-Q:
Port-based Q-in-Q
Selective Q-in-Q
– MLD Snooping:
MLD v1/v2 Snooping
Support 1024 MLD Groups
Host-based MLD Snooping Fast Leave
VLAN
– VLAN Group:
Max. 4K VLAN groups
– GVRP:
Max. 4K dynamic VLAN groups
– 802.1Q Tagged VLAN
– Port-based VLAN
– 802.1v Protocol VLAN
– Voice VLAN
– MAC-based VLAN
– VLAN translation
– ISM VLAN
– Asymmetric VLAN
– Private VLAN
– VLAN Trunking
– Super VLAN
QoS (Quality of Service)
– 802.1p
– 8 queues per port
– Queue Handling:
Strict Priority
Weighted Round Robin (WRR)
Strict + WRR
– Supports following actions for flows:
Remark 802.1p Priority Tag
Remark TOS/DSCP Tag
Bandwidth Control
– CoS based on:
Switch port
VLAN ID
802.1p priority queues
MAC address
IPv4 address
DSCP
Protocol type
TCP/UDP port
User-defined packet content
IPv6 address
IPv6 traffic class
IPv6 flow label
– Bandwidth Control:
Port-based (ingress/egress, min. granularity 8 Kbps)
Flow-based (ingress/egress, min. granularity 8 Kbps)
– Three Color Marker:
CIR/PIR minimum granularity: 8 kbps
Two Rate Three Color Marker (trTCM), CBS/PBS
Single Rate Three Color Marker (srTCM), CBS/EBS
Access Control List (ACL)
– ACL based on:
802.1p priority
VLAN ID
MAC address
Ether Type
IPv4 address
DSCP
Protocol type
TCP/UDP port number
User-defined packet content
IPv6 address
IPv6 flow label
IPv6 traffic class
– Supports up to 2048 ingress access entries
– Supports up to 512 egress access entries
– Time-based ACL
– CPU Interface Filtering
Security Features
– SSH v2
– SSL v1/v2/v3
– Port Security:
Up to 64 MAC addresses per port
– IP-MAC Port Binding
– DHCP Snooping
– Supports up to 500 address binding entries
– Broadcast/Multicast/Unicast Storm Control
– Traffic segmentation
– D-Link Safeguard Engine
– NetBIOS/NetBEUI Filtering
– IPv6 ND Snooping
– DHCP Server Screening
– ARP Spoofing Prevention
– DoS Attack Prevention
– BPDU Attack Protection
– ARP Packet Inspection
– IP Packet Inspection
AAA
– 802.1X:
Port-based Access Control
Host-based Access Control
Identity-driven Policy (VLAN, ACL or QoS) Assignment
Authentication Database Failover
– Web-based Access Control (WAC):
Port-based Access Control
Host-based Access Control
Identity-driven Policy (VLAN, ACL or QoS) Assignment
Authentication Database Failover
– MAC-based Access Control (MAC):
Port-based Access Control
Host-based Access Control
Identity-driven Policy (VLAN, ACL or QoS) Assignment
Authentication Database Failover
– Guest VLAN
– Microsoft NAP:
Support 802.1X NAP
Support DHCP NAP
– RADIUS Accounting
– RADIUS and TACACS+ authentication for switch access
– Four levels of User Account Control
Green Features
– Compliant with RoHS
– Power saving by Link Status
– Power saving by cable length
– Time-based PoE
– IEEE 802.3az Energy-Efficient Ethernet (EEE)
OAM
– Cable diagnostics
– Hardware-based Dying Gasp
– 802.3ah Ethernet Link OAM
Management
– Web-based GUI
– Command Line Interface (CLI)
– Telnet Server
– Telnet Client
– TFTP Client
– DNS Client
– Secure FTP Server
– ZModem
– SNMP v1/v2c/v3
– SNMP Traps
– System Log
– sFlow
– Multiple images Multiple Configurations
– RMON v1:
Supports 1,2,3,9 groups
– RMON v2:
Supports ProbeConfig group
– LLDP
– BootP/DHCP Client
– DHCP Auto-Configuration
– DHCP Relay
– DHCP Client Option 12
– DHCP Relay Option 18, 37, 82
– Flash File System
– PPPoE Circuit-ID Tag Insertion CPU monitoring
– Debug command
– SNTP
– NTP
– Password recovery
– Password encryption
– Trusted Host
– ICMPv6
– DHCP server
L3 Features
– Max. 16 IP interfaces
– ARP Proxy
– IPv6 Neighbour Discovery (ND)
– VRRP
L3 Routing
– Static Route:
Max. 512 IPv4 entries
Max. 512 IPv6 entries
– RIPv1/v2/ng
L3 Multicasting
– IGMP Filtering:
Port-based filtering
VLAN-based filtering
MIB
– RFC 1213 MIB II
– RFC 4188 Bridge MIB
– RFC 1157, 2571-2576 SNMP MIB
– RFC 1907 SNMPv2 MIB
– RFC 1757, 2819 RMON MIB
– RFC 2021 RMONv2 MIB
– RFC 1398, 1643, 1650, 2358, 2665 Ether-like MIB
– RFC 2674 802.1p MIB RFC 2233, 2863 IF MIB
– RFC 2618 RADIUS Authentication Client MIB
– RFC 2620 RADIUS Accounting Client MIB
– RFC 2925 PING TRACEROUTE MIB
– RFC 2674, 4363 802.1p MIB
– RFC 1065, 1066, 1155, 1156, 2578 MIB Structure
– RFC 1215 MIB Traps Convention
– RFC 1212 Concise MIB Definitions
– RFC 1215 MIB Traps Convention
– RFC 1157, 2571-2576 SNMP MIB
– RFC 4022 MIB for TCP
– RFC 4113 MIB for UDP
– RFC 4293 IPv6 SNMP Mgmt Interface MIB
– RFC 2737 Entity MIB (version 2)
RFC Standard Compliance
– RFC 768 UDP
– RFC 791 IP
– RFC 792, 2463, 4443 ICMP
– RFC 793 TCP
– RFC 826 ARP
– RFC 3513, 4291, IPv6 Addressing Architecture
– RFC 2893, 4213 IPv4/IPv6 dual stack function
– RFC 2463, 4443 ICMPv6
– RFC 2462, 4862 IPv6 Stateless Address Auto Configuration
– RFC 2464 IPv6 Ethernet and definition
– RFC 1981 Path MTU Discovery for IPv6
– RFC 2460 IPv6
– RFC 2461, 4861 Neighbor Discovery for IPv6
– RFC 783 TFTP
– RFC 2068 HTTP
– RFC 1492 TACACS
– RFC 2866 RADIUS Accounting
– RFC 2474, 3260 DiffServ
– RFC 1321, 2284, 2865, 3580, 3748 Extensible Authentication Protocol (EAP)
– RFC 2571, 2572, 2573, 2574, SNMP
– RFC 854 Telnet
– RFC 951, 1542 BootP
Ordering Information
24 10/100/1000BASE-T ports, 2 10GBASE-T ports, and 4 10G SFP+ port Lite L3 Stackable Managed Switch
There are no reviews yet.