D-Link DGS-712 10-100-1000BASE-T Copper SFP Transceiver

1.Convert an SFP fiber interface into a 1000Base-T copper uplink .2.Plug and Play Fits easily into any SFP interface providing copper connectivity .3.Hot Pluggable .4.Compatible with all standard 1000Base-T twisted pair copper cabling.5.Up to 1.25Gbps bi-directional data when combined with an additional DGS-712
– Convert an SFP Fiber Interface into a 1000Base-T Copper Uplink
– Hot Pluggable
– Compatible with All Standard 1000Base-T Twisted Pair Copper Cabling
– Up to 1.25Gbps Bi-directional Data when Combined with an Additional DGS-712
Standard: IEEE 802.3ab 1000BASE-T Gigabit Ethernet
Transceiver Type: SFP (Small Form Pluggable)
Connector: RJ-45
Auto MDI/MDIX: Automatic crossover detection enabled; External crossover cable not required
Data Rate: 1,000 Mbps (IEEE 802.3 compatible); 10/100/1000 BASE-T operation requires the host system to have an SGMII interface with no clocks. With a SERDES interface, this transceiver will operate at 1000BASE-T only
Cable Type: Cat. 5 twisted-pair cable
Maximum Cable Distance Coverage: 100 meters
Supply Current: 350mA (typical), 400mA (maximum), 1.3W max power over full range of voltage and temperature
Input Voltage: 3.1V (minimum), 3.3V (typical), 3.5V (maximum), Referenced to GND
Surge Current: 30mA; Hot plug above steady state current
Operating Temperature: 32° to 185° F (0° to 85° C)
Storage Temperature: -40° to 185° F (-40° to 85° C)
Waranty: 2 Years